Alright, let’s talk about setting up the AquaStar 60. I’d been meaning to upgrade my tank for a while, and I finally took the plunge with this one. I’m no expert, but I like to keep a good record of my setups, so here’s how it went down.
Unboxing and First Impressions
First things first, I unboxed everything. It came with the tank, a filter, a heater, and some basic decorations. Honestly, the decorations were kinda cheesy, so I knew I’d be replacing those later. The tank itself felt pretty solid, though. Nice, thick glass.
Getting it Situated
Next, I had to figure out where to put the darn thing. 60 gallons is bigger than you think! I ended up clearing off a whole section of my counter. After that I cleaned very carefully before placing the fish tank on it.
Substrate and Hardscape
I went with a dark gravel substrate – I just think it looks cleaner. I rinsed the gravel like a million times to get rid of all the dust. Then, I arranged some larger rocks and driftwood I’d picked up. I wanted a natural look, nothing too fancy.
Filling ‘er Up
This part took a while. I slowly filled the tank with dechlorinated water. I used a bucket and made sure to pour the water over a plate to avoid messing up the substrate. Slow and steady wins the race, as they say.
Filter and Heater Installation
The filter was pretty straightforward to install. It’s an internal filter, so it just hangs on the back of the tank. The heater was even easier – just stuck it to the side with the suction cups. I made sure to position it near the filter output for good circulation.
Cycling the Tank
Now for the waiting game. I added some fish food to start the nitrogen cycle. I also used a testing kit to monitor the ammonia, nitrite, and nitrate levels. This part is super important – you can’t just throw fish in right away!
- Day 1: Added fish food, tested water.
- Day 7: Ammonia levels starting to rise.
- Day 14: Nitrites detected!
- Day 21: Nitrates showing up, ammonia and nitrites dropping.
- Day 28: Ammonia and nitrites at zero, nitrates stable. Cycled!
Adding the Fish (Finally!)
After a month of waiting, I was finally able to add my fish. I started with a small group of hardy fish to make sure everything was stable. I floated the bags for about 20 minutes to acclimate them to the temperature, then carefully released them into the tank.
Ongoing Maintenance
I’m now doing weekly water changes (about 25%) and testing the water regularly. I also clean the filter media every few weeks. It’s a bit of work, but it’s worth it to keep the tank healthy and the fish happy. It keeps providing me with an excellent experience.
So there you have it – my AquaStar 60 setup. So far, so good! It’s a great tank, and I’m really enjoying it.
